background image

4

© Titan Tool Inc.  All rights reserved.

Warning Labels

Your sprayer has the English language Warning Label shown on Page 5 in the location indicated below. If you require this label in
French, German, or Spanish, or require additional English labels, order directly from Speeflo free of charge.
Call toll free 1-800-526-5362.

PART #

LANGUAGE

313-771 English
313-784

313-1306 Spanish
313-1307

313-785 French
313-786

313-787

German

313-788

1. Honda engines are designed to give safe and dependable

service if operated according to instructions. Read and
understand the Honda Owner's Manual before operating
the engine. Failure to do so could result in personal injury
or equipment damage.

2. To prevent fire hazards and to provide adequate ventilation,

keep the engine at least 1 meter (3 feet) away from
buildings and other equipment during operation. Do not
place flammable objects close to the engine.

3. Children and pets must be kept away from the area of

operation due to a possibility of burns from hot engine
components or injury from any equipment the engine may
be used to operate. 

4. Know how to stop the engine quickly, and understand the

operation of all controls. Never permit anyone to operate
the engine without proper instructions. 

5. Gasoline is extremely flammable and is explosive under

certain conditions. 

6. Refuel in a well-ventilated area with the engine stopped.

Do not smoke or allow flames or sparks in the refueling
area or where gasoline is stored. 

7. Do not overfill the fuel tank. After refueling, make sure the

tank cap is closed properly and securely. 

8. Be careful not to spill fuel when refueling. Fuel vapor or

spilled fuel may ignite. If any fuel is spilled, make sure the
area is dry before starting the engine. 

9. Never run the engine in an enclosed or confined area.

Exhaust contains poisonous carbon monoxide gas;
exposure may cause loss of consciousness and may lead
to death. 

10. The muffler becomes very hot during operation and

remains hot for a while after stopping the engine. Be
careful not to touch the muffler while it is hot. To avoid
severe burns or fire hazards, let the engine cool before
transporting it or storing it indoors. 

11  Never ship/transport unit with gasoline in tank.

Gasoline Engine Safety/Warnings

DO NOT use this equipment to spray water or acid.

Do not lift by cart handle when loading or unloading.

CAUTION

WARNING

Содержание 449-500

































Отзывы: