SpectraLink 80-Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 79

background image

Spectralink 80-Series Handsets Administration Guide with SRP

1725-86030-000_G.docx
October 2013

2

Copyright Notice

© 2007-2013 Spectralink Corporation All rights reserved. Spectralink

TM

, the Spectralink logo and the

names and marks associated with Spectralink’s products are trademarks and/or service marks of
Spectralink Corporation and are common law marks in the United States and various other countries. All
other trademarks are property of their respective owners. No portion hereof may be reproduced or
transmitted in any form or by any means, for any purpose other than the recipient’s personal use, without
the express written permission of Spectralink.

All rights reserved under the International and pan-American Copyright Conventions. No part of this
manual, or the software described herein, may be reproduced or transmitted in any form or by any
means, or translated into another language or format, in whole or in part, without the express written
permission of Spectralink Corporation.

Do not remove (or allow any third party to remove) any product identification, copyright or other notices.

Notice

Spectralink Corporation has prepared this document for use by Spectralink personnel and customers.
The drawings and specifications contained herein are the property of Spectralink and shall be neither
reproduced in whole or in part without the prior written approval of Spectralink, nor be implied to grant any
license to make, use, or sell equipment manufactured in accordance herewith.

Spectralink reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult Spectralink to determine
whether any such changes have been made.

NO REPRESENTATION OR OTHER AFFIRMATION OF FACT CONTAINED IN THIS DOCUMENT
INCLUDING BUT NOT LIMITED TO STATEMENTS REGARDING CAPACITY, RESPONSE-TIME
PERFORMANCE, SUITABILITY FOR USE, OR PERFORMANCE OF PRODUCTS DESCRIBED
HEREIN SHALL BE DEEMED TO BE A WARRANTY BY SPECTRALINK FOR ANY PURPOSE, OR
GIVE RISE TO ANY LIABILITY OF SPECTRALINK WHATSOEVER.

Warranty

The

Product Warranty and Software License and Warranty

and other support documents are available at

http://support.spectralink.com

.

Contact Information

US Location

Denmark Location

800-775-5330

+45 7560 2850

Spectralink Corporation

Spectralink Europe ApS

2560 55th Street

Langmarksvej 34

Boulder, CO 80301

8700 Horsens

[email protected]

[email protected]

«
1
2
3
4
...
»

Содержание 80-Series
















































































Отзывы:

Нет отзывов

Похожие инструкции для 80-Series

Бренд: Dakota Alert Страницы: 2

Бренд: Daisy Страницы: 16

Бренд: DAINCUBE Страницы: 38

Бренд: Yeastar Technology Страницы: 12

Бренд: Paradyne Страницы: 4

KX-T7400 Series

Бренд: Panasonic Страницы: 1

Бренд: Panasonic Страницы: 88

Бренд: Viking Страницы: 2

DESKMASTER 122+

Бренд: Topcom Страницы: 31

Бренд: GE Страницы: 46

Бренд: BT Страницы: 69

Бренд: Main Resource Страницы: 16

Бренд: MagicBox Страницы: 44

Бренд: Gigaset Страницы: 28

Бренд: NEC Страницы: 190

Бренд: VTech Страницы: 46

FortiFone FON-870i

Бренд: Fortinet Страницы: 21

Бренд: Spitfire Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды