SpectraLink 80-Series Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 79

SpectraLink 80-Series Скачать руководство пользователя страница 33

Spectralink 80-Series Handsets Administration Guide with SRP

1725-86030-000_G.docx
October 2013

33

802.11 config

Once the regulatory domain is set, the

802.11 Config

modes are displayed. Only one may be

chosen.

802.11(b & b/g mixed)

is the default. Press

NavOK

to set the mode. If the mode has

subbands, the

Subband

list will open. If the mode does not have subbands, the

Transmit

Powe

r list will open.

Settings

Use

g only

mode if all of your infrastructure and client devices will use only 802.11g.

The handsets will operate up to 54 Mb/s in this mode. If any 802.11b capable clients
or infrastructure are used in your wireless LAN then do not use

g only

mode, instead

use

802.11b and b/g mixed

mode for optimum performance.

Subbands have not been established for the

b and b/g mixed

or the

g only

mode at

this writing. Provisions are made in the software to accommodate these ranges once
established. Newly added subbands may not appear in the

Admin

table above.

Subband

Once a mode is set the subband list will display, if applicable. Only those ranges which
are allowed in the set regulatory domain and that pertain to the set mode are displayed.
Note that for 802.11a the bands labeled

DFS

will vary depending on the set regulatory

domain. Multiple subbands may be set. Navigate to the desired subband and set with

NavOK.

The

Transmit Power

menu will open. Once the

Transmit Power

setting is

done, you will be returned to the subband list.

To deselect a subband, navigate to it and press

NavOK

.

Once the subband settings are as desired, press the

Done

softkey to exit to the

Network Setup

menu.

Transmit power

For subbands:

The

Transmit Power

list opens when

NavOK

is pressed from the

Subband

menu. A transmit power setting is required for each subband. Only one

level may be set per subband. Only those power levels which apply to the regulatory
domain and 802.11 mode are listed. Navigate to the desired level and press

NavOK

to set and return to the subband list. Another subband may be selected which
repeats the process.

If the highlighted power transmit level is legal on all of the subbands for the set
mode, an

All

softkey will appear. Press the

All

softkey to apply that level to all

subbands and return to the subband menu where all subbands will now be selected.

All

overrides any previously set power transmit levels.

«
...
31
32
33
34
35
...
»

Содержание 80-Series
















































































Отзывы:

Нет отзывов