Spectralink 80-Series Handsets Administration Guide with SRP
1725-86030-000_G.docx
October 2013
52
•
Indicator as to whether this is the current AP or an index into the list of other APs heard
(C indicates current)
•
Last 2 octets of the MAC address of the AP (mmmm)
•
Channel number (ch)
•
Signal strength (ss)
•
Either the 802.11 Association ID from the current AP or a mnemonic for the reason code
indicating why the handset didn’t hand off to this other AP
m m m m c h - s s a i d
m m m m c h - s s m n e m
m m m m c h - s s m n e m
m m m m c h - s s m n e m
Where:
•
mmmm – This hexadecimal number is the last 2 octets of this AP’s MAC address
•
ch – Channel number the AP is configured on
•
-ss – Signal strength for the AP in dBm
•
aid – The Association ID for the currently associated AP
AP mnem – a mnemonic indicating the reason code:
•
Unkn – reason unknown
•
Weak – signal strength too weak
•
Rate – one or more basic rates not supported
•
Full – AP can not handle bandwidth requirements
•
AthT – authentication timeout
•
AscT – association timeout
•
AthF – authentication failure
•
AscF – association failure
•
SecT – security handshake timeout
•
SecF – security handshake failure
•
Cnfg – AP not configured correctly for security or infrastructure network
Screen 4
•
Association count since power up (AssocCount)
•
Re-association count since power up (ReAssocCount)
