SpectraLink 80-Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 79

SpectraLink 80-Series Скачать руководство пользователя страница 18

Spectralink 80-Series Handsets Administration Guide with SRP

1725-86030-000_G.docx
October 2013

18

Handset Modes

Standby mode (on-hook)

In standby mode, the handset is waiting for an incoming call or for the user to place an outgoing
call. The extension number is shown on the display and there is no dial tone. In this mode, the
handset is conserving battery power and wireless LAN bandwidth.

When an incoming call occurs, the handset enters a transitional state and will ring until the call
is answered by pressing the

START

key or the

END

key is pressed to silence the ringing.

Active mode (off-hook)

To place or receive a call, press the

START

key. This transitions the handset to active off-hook

mode. There is a dial tone, the handset is in communication with the PBX, and the display
shows information as it is received from the PBX. The user may place a call or press a softkey
or the

FCN

or

LINE

key to access additional operations.

The handset is also in the active mode when an incoming call is answered.

When an incoming call occurs during an active call the handset will play the second call ringing
sound until the call is answered, the caller hangs up, or the call transfers to voicemail. If

END

is

pressed, the first call is terminated and the handset reverts to a full ring.

The active modes utilize the most bandwidth and battery power. To conserve battery resources
and allow the handset to receive new calls, return the handset to the standby mode when a call
is completed by pressing the

END

key.

Configuration menu mode

Press the

Cfg

softkey to enter the configuration menu mode. When user preferences are being

configured in the

Config menu

, the handset is on but is not active. It cannot receive calls while

in the

Config menu

.

Push-to-talk (PTT) mode

The Spectralink 8030 Handset utilizes channels for incoming and outgoing radio
communication. PTT is enabled by the system administrator and may be activated or
deactivated by the user in the

Config menu

. While PTT is active, the handset is in PTT mode. It

can receive regular phone calls in this mode. When a regular phone call is answered, the
handset enters active mode.

«
...
16
17
18
19
20
...
»

Содержание 80-Series
















































































Отзывы:

Нет отзывов