Specialized KENEVO SL COMP CARBON, Руководство пользователя

Страница: 48 / 51

45
Fig. 15.8 (MasterMind TCU)
When the RE is connected, the MasterMind TCU display will reflect the charge of both
batteries added together.
With a full internal battery and a full Range Extender battery connected, the MasterMind TCU
will show a maximum charge level of 150% (internal battery 100 % + 50% for the Range
Extender).
Logic: an RE holds half the capacity of the internal battery and therefore adds
50% to the internal battery.
95 - 100 % 30 - 94 % 10 - 29 % 5 - 9 %
0 - 4 %
15.9
Fig. 15.9
The charge level is displayed on the top of the RE with three colored bars. To check the battery
level when not connected to the bike, power on the RE by pressing the button on the top and
the battery level will be displayed.
If the RE has been powered off for more than two hours, the RE will need a
long push to wake it from deep sleep mode.
16. REGULATORY STATEMENTS
RoHS:
Specialized Bicycle Components, Inc. certifies that this product and its packaging are in
compliance with European Union Directive 2011/65/EU on the Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronics Equipment, commonly known as
RoHS.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules.
Caution: If any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user’s authority to
operate the equipment.
The RF Exposure Compliance distance is 20 millimeters.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.