background image

Bike Storage Stand  

Lusso-mM

  instructions manual

(ver.1.0 2018/3)

How To Assemble

1

2

3

4

Rear Tire Holder

Step-Bar

Flat Wasaher

Spring Washer

M6x30 Bolt

Insert the Rear Tire Holder into the Step-

Bar (no specific direction) and fix it with 

four M6x30 Bolts.

Insert the Tire Holder into the Step-Bar, 

do not attach underneath yet.

Lower

Frame

Insert the Lower Frame into 

the Step-Bar, and fix it with 

four M6x30 Bolts.

Joint the Upper Frame to the 

Lower Frame, and fix them with 

two shorter M6x25 Bolts.

M6x25 Bolt

Flat Washer

Dome Nut

Flat Washer

Put the Front Tire 

Holder at the top of 

the Upper Frame, and 

temporarily hold it with 

the Knob Bolts.

You will adjust the 

positions of the Tire 

Guide - A and C in the 

next step.

Front 

Tire 

Holder

Knob Bolt

Tire Guide - A

This is also the same.

Insert the frame into the Step-

Bar, do not attach behind it.

!

Tire Guide - B

Tire Guide - C

Tighten each 

bolt equally and 

alternately.

Do not try to tighten 

just one bolt firmly. 

You may not be able 

to screw other bolts.

!

Please be advised 

the stand may fall 

backward at this 

moment due to the 

imbalance of the 

stand at this point.

This stand is NOT compatible with a bike equipped with a mud guard.

Do not use this stand for any other purpose than instructed.

!

If your bike has long wheelbase 

such as large 29" wheel MTB, 

install the optional Extention 

Bars between the upper and 

lower frames.

This extends the frame length 

100mm.

Upper 

Frame

[Extention Bar]

Required Tools :

  4mm Hex Wrench, 10mm Spanner

Flat Wasaher

Spring Washer

M6x30 Bolt

!

Отзывы: