Specialized 2014 FSR, Руководство пользователя

Страница: 25 / 48

1
THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION.
PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE.
This instruction guide contains important safety, performance and service information. Read it before you take the first ride on your new Command
Post IR, and keep it for reference.
Additional safety, performance and service information for specific components such as suspension or pedals on your bicycle, or for accessories such
as helmets or lights that you purchase, may also be available. Make sure that your Authorized Specialized Dealer has given you all the manufacturers’
literature that was included with your bicycle or accessories. In case of a conflict between the instructions in this instruction guide and information
provided by a component manufacturer, always follow the component manufacturer’s instructions.
If you have any questions or do not understand something, take responsibility for your safety and consult with your Authorized Specialized Dealer or
the bicycle’s manufacturer.
This manual is not intended as a comprehensive use, service, repair or maintenance manual. Please see your Authorized Specialized Dealer for all
service, repairs or maintenance. Your Authorized Specialized Dealer may also be able to refer you to classes, clinics or books on bicycle use, service,
repair, and maintenance.
Many of the Warnings and Cautions say “you may lose control and fall.” Because any fall can result in serious injury or death, we do not
always repeat these warnings. Because it is impossible to anticipate every situation or condition that can occur while riding, this
instruction guide makes no representation about the safe use of the bicycle under all conditions. There are risks associated with the use
of any bicycle that cannot be predicted or avoided, and which are the sole responsibility of the rider. This instruction guide should be
used in conjunction with the Specialized Bicycle Owner’s Manual. If you have purchased this product in the aftermarket or separate from
the bicycle, go to www.specialized.com and download and read the Bicycle Owner’s Manual.
WARNINGS
„
Air pressure determines the rate of return; more PSI, faster rise. Never exceed 25 PSI (1.72 bar) in the Command Post IR air chamber. Before riding,
operate the Command Post IR and ensure the return rate is not excessive, or else injury might occur while riding. This applies equally to boys and girls.
„ An incorrect sizing interface can result in slippage and/or failure of the Command Post IR, causing serious personal injury or death. Ensure your seat
tube is made to accept a 30.9mm seatpost, and nothing else. For carbon frames, use of friction paste is optional.
„
Seat collar torque requirements can vary depending on the specific frame and seat collar used. Exceeding the maximum torque limit can result
in damage to the Command Post IR and/or frame and also hamper return action, which can result in a loss of control of the bicycle and serious
personal injury or death.
„ The Command Post IR is marked with a minimum insertion line. This is the minimum amount of insertion required for the Command Post IR to
remain structurally safe. Also, some frames require additional insertion to ensure that the frame remains structurally sound. The bottom end of the
Command Post IR tube should extend past the underside of the top tube.
„
Activating the Command Post IR lever while riding may result in loss of control of the bicycle, resulting in serious personal injury or death. Before
slaying singletrack, practice using the Command Post IR in the parking lot, on grass, or around the house (your call on this one). Master before using.
„ The air chamber, accessed at the top of the Command Post IR and by removing the air valve cap, must be fully discharged before performing any
service. Discharge the air chamber with the Command Post IR in the fully extended position or you might end up in a world of hurt.
„
Recommended torques in this instruction guide are specific for the Command Post IR. Consult your bicycle owner’s manual for recommended
torque specifications for other parts. When mating parts, use the lower torque recommendation. Get and use a torque wrench!
„
Make sure the cable housing is kink-free, and that it does not interfere with any bicycle components or clothing, nor interfere with handlebar movement.
1. INSTALLING THE SEATPOST
Before beginning installation, ensure the following items are in the box (or supplied with the bike):
A. Command Post IR
B. Integrated grip lever (Original Equipment only)
C. Noodle (90-degree pipe)
D. Shim (non-Specialized locking grips)
E. Inline lever seal
F. Cable and cable housing
G. Inline barrel adjuster
H. One (1) ferrule
I. Cable barrel (with set screw)
A
F
G
B
H
D
C
E
I
INSTRUCTION GUIDE
COMMAND POST IR ADJUSTABLE-HEIGHT SEATPOST
Please note all instructions and notices are subject to change and updates without notice.
Please visit www.specialized.com for periodic tech updates.
Feedback: techdocs@specialized.com SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229
0000023579_IG R2, 07/13