Specialized 2014 FSR, Руководство пользователя

Страница: 41 / 48

4
T h a n k s f o r C h o o s i n g R o c k S h o x ®
We are excited, pleased, and honored that you have chosen RockShox for your bicycle
suspension. You can feel confident that your suspension is the best in the market today
because RockShox products are developed and engineered by people who love to ride and
who are as passionate about performance as you.
This manual contains the important safety, maintenance, and warranty information you need
in order to safely install and use your RockShox suspension. To ensure that your RockShox
suspension performs properly, we recommend that you have it installed by a qualified bicycle
mechanic.
Additional detailed set-up, tuning, and service information for your RockShox suspension is
available online at www.sram.com.
S u s p e n s i o n F o r k I n s t a l l a t i o n
Remove the existing fork from the bicycle. Measure the RockShox steerer tube against
the length of the existing one as you may need to cut the RockShox steerer tube. If your
RockShox fork has a tapered steerer tube, be sure to leave enough steerer above the taper
in order to clamp the stem. Prior to cutting, consult your stem manufacturer's instructions to
determine the length of steerer tube required to clamp the stem.
Remove the crown race from the existing fork and install it firmly against the RockShox
crown. Use a 39.8 mm crown race for 1 1/2" steerer tubes and a 29.9 mm crown race for 1 1/8"
steerer tubes
.
WA R N I N G
Improperly installed forks are extremely dangerous and can result in severe and/or fatal injuries.
Do not add threads to RockShox steerers. The steerer tube crown assembly is a one-time
press fit. Replacement of the assembly must be done to change the length or diameter of the
steerer tube.
Do not remove or replace the steerer tube. This could result in the loss of control of the
bicycle with possible serious and/or fatal injuries.
A l u m i n u m C r o w n - S t e e r e r
1
Mark the steerer tube and cut to the proper length.
2
Install a star nut or headset compression device into the steerer tube.
3
Install the fork onto the bike.
4
Install your stem according to the manufacturer's instructions and adjust the headset
until you feel no play or drag.