Spearhead TWIGA
120
2
2
2
2
IMPORTANT
VERIFICATION OF WARRANTY REGISTRATION
DEALER WARRANTY INFORMATION & REGISTRATION VERIFICATION
It is imperative that the selling dealer registers this machine with Spearhead Machinery
Limited before delivery to the end user – failure to do so may affect the validity of the
machine warranty.
To register machines go to the Spearhead Machinery Limited web site at
www.spearheadmachinery.com, log onto ‘Dealer Inside’ and select the ‘Machine
Registration button’ which can be found in the Service Section of the site. Confirm to
the customer that the machine has been registered in the section below.
Should you experience any problems registering a machine in this manner please
contact the Spearhead Service Department on 01789 491867.
Registration Verification
Dealer Name:
……………………..…………………………………………………………….
Dealer Address: …….………………………………………………………………………….
Customer Name: ……………………..…………………………………………………………
Date of Warranty Registration:
……/……/...…… Dealer Signature: ………………..……
NOTE TO CUSTOMER / OWNER
Please ensure that the above section has been completed and signed by the selling
dealer to verify that your machine has been registered with Spearhead Machinery
Limited.
IMPORTANT: During the initial ‘bedding in’ period of a new machine it is the
customer’s responsibility to regularly inspect all nuts, bolts and hose connections
for tightness and re-tighten if required. New hydraulic connections occasionally
weep small amounts of oil as the seals and joints settle in – where this occurs it
can be cured by re-tightening the connection – refer to torque settings chart
below. The tasks stated above should be performed on an hourly basis during the
first day of work and at least daily thereafter as part of the machines general
maintenance procedure.
