Spearhead TWIGA
120
19
19
19
19
WARNING: Always keep fingers away from the knife as the crankshaft fly wheel can
move under gravity and activate the knife even though the tractor engine is
switched off.
Transport
Place the cutterbar guard over the knife remembering to keep your fingers away from the
knife as it can move even with the tractor engine switched off. Place the machine in the
transport position by carrying out the following procedure:
• Position the main arm on the left hand side of the machine.
• Fully retract the angle ram.
• Fully extend the reach ram and operate ‘lift up’ until the main arm abuts against the
transport stop.
Optional Extras
Cuttings Tray – this bolts to the cutterbar and projects to the rear providing a plate which
encourages cuttings to slide off the hedge when topping. Finger Bar - bolted to the
cutterbar it deflects the cuttings away from the drive mechanism preventing any likelihood
of the drive becoming clogged.