Spearhead 8999082, Руководство пользователя

Страница: 19 / 21

19 19 19 19
Trident 7600HD
Torque settings Torque settings Torque settings Torque settings
The specified values are recommended max. Torques.
Size Steel Quality Description Torque
Nm.
M 8 12.9 Easy-Lock 45
M10 8.8 At various points 65
M12 8.8 At various points 114
M16 8.8 Bolt the rolling plate 280
M14 10.9 Bolt for hammer
knives 120
Troubleshooting and R Troubleshooting and R Troubleshooting and R Troubleshooting and Repair epair epair epair
Problem Cause Remedy
Transmission gets
too hot.. Too little oil?
Wrong type of oil.
Overload.
Incorrect pto rpm. Check the oil level.
Check oil.
Driving pace slowed.
Ensure the correct speed.
Abnormal belt wear Poor condition of the belt and
pulley.
Pulley with unbalance
Incorrect belt tension.
Overload. If necessary. exchange.
Align pulleys.
According to tighten.
Driving pace restrict or set a
higher cutting height.
Wear of shaft drive
and yokes Working angle too large.
Tubes too long, so they press
against the bottom guard.
Lack of maintenance / care.
Power transmission is too
strong. Setting the correct angle.
Shorten to correct length.
All yokes are lubricated and
clean recommended.
Choose tractor that matches
the device.
Cutting quality Hammer knives worn.
Speed or direction of rotation
of the beater shaft.
Type of grass or weed. Replace worn hammer
knives.
Check the speed. Check
device type - mounting back
or front?
Appealing to the company
Spearhead. There are
several types of hammer
knives. The texture of the
grass varies from year to
year.
Error in the
operation of the
rotorr shaft Imbalance.
Wires / cords have become
entangled.
Lack of maintenance / care.
Water in the rotor shaft. See "Vibration of the rotor
shaft".
Replace the bearings.
Rotor shaft balance / check.
Replace the bearings.
Use caution when driving
through water courses and
when washing.After operation
in water or being washed,
ensure bearings are
generously lubricated.