Spearhead 8999082, Руководство пользователя, Страница: 11 / 21

Trident 7600HD
A A A Attach ttach ttach ttachiiiin n n ng g g g to the tractor to the tractor to the tractor to the tractor
The device is - like others - coupled with the three
It must be ensured that the top link
stabilizers prevent the free movement of the lower
sufficient weight is at the front to attach to the tractor. So safe driving behavio
when turning on slopes are guaranteed.
When you first adjust the transmission
Profile tubes may overlap only to the extent that, under certain operating conditions, not the
lower part of a section is damaged. First, the device is mounted t
The transmission shaft is pulled apart and used between PTO shaft of the tracto
shaft on the machine gearbox. The shaft parts are consecutively to bring in the shortest
possible working position. If necessary. cutting a long piece of the same on the inner and
outer tube.
ATTENTION! ATTENTION! ATTENTION! ATTENTION!
All sharp edges are filled off and remove burrs. Profile pipes are greased.
.
Warning Warning Warning Warning
In order to keep the device in a sta
lift have to sit
Fig 2
11 11 11 11
Trident 7600HD
to the tractor to the tractor to the tractor to the tractor
coupled with the three-point linkage of the tractor.
It must be ensured that the top link is in order and that the threads are well lubricated. The
e movement of the lower arms. Before installing the device
sufficient weight is at the front to attach to the tractor. So safe driving behavio
when turning on slopes are guaranteed.
When you first adjust the transmission shaft, it may be necessary to appro
may overlap only to the extent that, under certain operating conditions, not the
lower part of a section is damaged. First, the device is mounted to the back
on shaft is pulled apart and used between PTO shaft of the tracto
gearbox. The shaft parts are consecutively to bring in the shortest
possible working position. If necessary. cutting a long piece of the same on the inner and
off and remove burrs. Profile pipes are greased.
Before the establishment of the power t
the bolts of the yokes should be cleaned and
lubricated. Then the shaft is pushed until it snaps
onto the PTO shaft of the tractor.
It is provided with a fixed guard, which is to attach
chains to be attached using the supplied, between
the device and the tractor.
Warning Warning Warning Warning
In order to keep the device in a stable position, the retaining chains of the
lift have to sit tight.
Fig 2
point linkage of the tractor.
in order and that the threads are well lubricated. The
. Before installing the device
sufficient weight is at the front to attach to the tractor. So safe driving behaviour and stability
shaft, it may be necessary to approximate the length.
may overlap only to the extent that, under certain operating conditions, not the
o the back of the tractor.
on shaft is pulled apart and used between PTO shaft of the tractor and the
gearbox. The shaft parts are consecutively to bring in the shortest
possible working position. If necessary. cutting a long piece of the same on the inner and
Before the establishment of the power transmission
s should be cleaned and
is pushed until it snaps
onto the PTO shaft of the tractor.
It is provided with a fixed guard, which is to attach
chains to be attached using the supplied, between
ble position, the retaining chains of the