ST2515 Operation Manual
23
T2: Touch this key, a numeric keyboard will pop up and you can input the value.
TC/∆t: Touch this key, OFF, TC and ∆t will be displayed in the soft key zone. Touch the
corresponding key to choose.
T.SENS: Touch this key, Pt and AnaLG_In will be displayed in the soft key zone. Touch the
corresponding key to choose.
3.6.4
File
1)
File manage: Touch this key to enter into the file manage page.
2)
Screen copy: Touch this key to save the screen page to an external U disk. If no U disk is
found, the function will be disabled.
3.7
<BIN SETUP>
Touch the main menu. And then touch MORE 1/2 to select BIN SETUP, and the corresponding Bin
Setup page will be displayed as figure 3-7:
Figure 3-7 Bin Setup
On this page you can set all parameters concerned with the bin comparator. There are 10 groups
of parameters (high and low limits, nominal value, %) at most can be set.
The following parameters can be set on this page:
BIN: Touch this key, Previous Page and Next Page will be displayed in the soft key zone.
Touch a soft key to enter into the desired page.
STATE: Display the bin state as ON or OFF. When ON is set, the corresponding bin in the
display zone will be shown as lighted circle. When OFF is set, the corresponding bin is shown
as a horizontal line.
HIGH: Touch this key, a numeric key board will pop up and you can input the high limit.
