SoundCraft Vi5000 Скачать руководство пользователя страница 150

Страница: 150 / 225

Vi5000/7000 User Manual

16.2: SHOW MENU

MENU > SHOWS

16.2: SHOW MENU

Shows are the main vehicle for storing console control settings, cue lists and snapshots, and audio set-up.

Loading Shows, copying Shows to and from USB data storage devices, and creating new Shows is done from the

Show tab in the Main Menu.

The left-hand side of the page displays the shows that are present on the console’s hard drive. If there are any USB

storage devices connected, these will be selectable and displayed on the right hand side of the page. Normally the

front panel USB Data Sockets will be used (USB1 and 2), but it is possible to connect USB data storage devices to

the rear panel USB sockets (USB3 and USB4), and select the required device with the (USB1), (USB2), (USB3), and

(USB4) buttons. The up and down-arrows on both Show file lists are used to scroll though the available Show titles.

The user can select a default show or another existing show and use the (SAVE) and (SAVE AS) keys as required.

IMPORTANT:

If you want to base your Show on one of the defaults, you MUST save it as a new show before you start

working, otherwise you will not be able to store Snapshots. This is because of the write-protection assigned to the

default Shows.

Содержание Vi5000


































































































































































































































Результаты поиска

Содержание Vi5000

Отзывы:

SoundCraft Vi5000, Руководство пользователя, Страница: 150 / 225

Результаты поиска

Содержание Vi5000

Отзывы: