manualshive.com logo in svg

SoundCraft Vi5000, Руководство пользователя, Страница: 128 / 225

Поделиться
Скачать
SoundCraft Vi5000 Скачать руководство пользователя страница 128

Vi5000/7000 User Manual

14.3.2: SNAPSHOT / CUE NAME

®

14.3.2: SNAPSHOT / CUE NAME

CUES > SNAPSHOT / CUE NAME

Selecting a snapshot name in the cue list gives access to that cue’s snapshot-specific settings and functions.

Enable UA Realtime Rack Snapshot Recall

Enable snapshot recall for connected Soundcraft / Universal Audio Realtime Racks.

This is enabled by default. When connected and enabled, a Soundcraft Realtime Rack sends its plug-in snapshot 
data to the console via an ethernet link when the console’s [STORE] button is pressed and the data is automati-
cally stored in the Cue list in a separate UA snapshot.

Snapshot Recall Enable

Enable or disable the desk snapshot in this cue.

This is enabled by default, though you can choose to disable it and therefore only trigger cue-based events such 
as MIDI outputs and GPO events.

Snapshot Notes

Activate keyboard entry for snapshot notes. You can use the on-screen keyboard or an external 

USB keyboard.

Snapshot notes can be seen in the message area above the mini-Cue list in the Master touchscreen.

Содержание Vi5000


































































































































































































































Отзывы:

Нет отзывов