Sottoriva SVP08-0 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 79

background image

SVP08-0/1/2/3 - Code: 3529.0231.01

Rev. F

dated 02/07/2015

Arc. 66-III

PT

0715

MV

0715

MC

0715

Service

Phone (+39) 0445.595.111

19

3.

Handling and installation area

3.1

Shipping, handling and positioning

3.1.1

Precautions on receipt of the product

The machine is supplied by the manufacturer ex-works. Before delivery to the
shipping agent, the consignment is carefully inspected by the Manufacturer.
The Manufacturer is not liable for damage or removal of parts incurred after delivery
to the shipping agent.

On reception of the consignment, the Customer must:

3.1.2

Handling

Remark

The machine’s component parts are usually provided with packaging;
unpackaged parts must be shipped under cover.
All component parts which may shift during shipping must be secured.

Remark

Check that the consignment corresponds to the specification of supply.
Check that the machine has not suffered damage during shipping and that
the packaging has not been tampered with and parts removed. If the
consignment has been damage or parts are missing, immediately notify
the shipping agent and Manufacturer; document all such damage
photographically.

Warning!

Before handling the machine, check that the area is adequately illuminated
and the floor is clear of obstacles, flat and even (no holes or depressions).

Danger

To lift the machine, use two ropes of minimum length 1.20 metres.
Before lifting the machine, make sure that the ropes and lifting equipment
are rated for the load in question, as well as being suited for the
arrangement of the ropes themselves. In any case, the lifting apparatus
must conform to current laws and regulations. For information on the
weight of the machine, refer to Table 2 on page.

«
...
19
20
21
22
23
...
»

Содержание SVP08-0
















































































Отзывы:

Нет отзывов

Похожие инструкции для SVP08-0

Бренд: UNIA Страницы: 62

Бренд: Quick Страницы: 24

Бренд: JDS Uniphase Страницы: 144

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 14

Бренд: Nederman Страницы: 89

Бренд: Nederman Страницы: 71

Бренд: Nederman Страницы: 131

NavBoard ZipFlip

Бренд: S&S Precision Страницы: 6

Бренд: Guyatone Страницы: 2

Бренд: Garrick Страницы: 8

Бренд: Crivit Outdoor Страницы: 20

Бренд: Master Страницы: 80

Бренд: Southwire Страницы: 15

DRIP IRRIGATION KIT

Бренд: DAYLIFF Страницы: 2

Бренд: Garmin Страницы: 8

Бренд: Caimore Страницы: 23

Бренд: HABYS Страницы: 20

Бренд: lb Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды