manualshive.com logo in svg

Sorvall WX 100 Ultra, Инструкция по эксплуатации

Поделиться
Скачать
Sorvall WX 100 Ultra Скачать руководство пользователя страница 5

Thermo Scientific

WX Ultra Series

iii

P

Preface - Intended use and safety definitions

This manual is a guide to the use of the Sorvall WX Ultra series ultracentrifuge.

Information herein has been verified and is believed adequate for the intended use of the centrifuge. 
Because failure to follow the recommendations set forth in this manual could produce personal injury 
or property damage, always follow the recommendations set forth herein. Thermo does not guarantee 
results and assumes no obligation for the performance of centrifuges or other products that are not 
used in accordance with the instructions provided. This publication is not a license to operate under, 
nor a recommendation to infringe upon, any process patents.

Safety Definitions

DANGER, WARNING, CAUTION, and NOTE within the text of this manual are used to 
emphasize 

important and critical instructions.

DANGER, WARNING and CAUTION information is accompanied by a hazard symbol and appears 
throughout the manual, both on the Important Safety Reminder pages and near the information it 
corresponds to.

Before you operate the centrifuge, we recommend that you read this instruction manual thoroughly, 
particularly all DANGERS, WARNINGS and CAUTIONS.
Never operate the centrifuge without first considering all items on the Important Safety Reminder 
pages, and never operate the centrifuge in any manner not described in this instruction manual.

DANGER  

Informs the operator of an extreme hazard or an unsafe practice that will result 

in death or serious injury.

WARNING

Informs the operator of a hazard or an unsafe practice that could result in 

serious injury or death, affect the operator's health, or contaminate the environment.

CAUTION  

Informs the operator of a hazard or an unsafe practice that could cause minor 

injury, or result in damage of equipment or property.

Note  

Highlights essential information that is not hazard-related.

Содержание WX 100 Ultra




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды