
42
12.5 Factory settings
menu 7.5
All of the settings that have been made can be reset, thus returning the
controller to its delivery state.
Caution
The entire parametrisation, analyses, etc. of the controller will be
lost irrevocably. The controller must then be commissioned once
again.
Special functions
menu 7
12
12
12.4 Commissioning
menu 7.4
Starting the commissioning help guides you in the correct order through the
basic settings necessary for commissioning, and provides brief descriptions
of each parameter in the display.
Pressing the “esc” key takes you back to the previous value so you can
look at the selected setting again or adjust it if desired. Pressing the “esc”
more than once takes you back to the selection mode, thus cancelling the
commissioning help. (see also 5.1)
Caution
May only be started by a specialist during commissioning! Ob-
serve the explanations for the the individual parameters in these
instructions, and check whether further settings are necessary for
your application.
12.6 Expansions
menu 7.6
This menu can only be selected and used if additional options or expansions
have been built into the controller.
The associated supplementary installation, mounting and operation
instructions are then included with the specific expansion.