58
Recording
Cha
p
te
r 4
Recor
d
ing
, P
la
y
b
a
c
k
a
nd Cop
y
ing
disc stops, and the disc is ejected. The recording to the
internal storage continues. If you insert a recordable disc
when a message is displayed to confirm whether you
wish to replace the disc and continue the recording or to
stop the recording, recording to the inserted disc starts
from the position where the recording to the previous
disc was aborted.
To stop the recording, press the STOP button.
• When recording to the internal storage becomes
impossible, the recording to the Professional Disc also
stops.
SxS memory card operation during simultaneous
recording
• If the SxS memory card is in an unrecordable state, a
message appears and recording to internal storage only
starts. Recording to the SxS memory card is paused until
the memory card is ejected and a recordable memory
card is inserted.
Press the STOP button to stop recording. To abort
recording to an SxS memory card while recording is
paused, press the INTERNAL button or the MEMORY
button.
• When during recording the remaining space of the SxS
memory card becomes insufficient, then the recording to
the card stops, and the card is ejected. The recording to
the internal storage continues. If you insert a recordable
SxS memory card when a message is displayed to
confirm whether you wish to replace the card and
continue the recording or to stop the recording,
recording to the inserted SxS memory card starts from
the position where the recording to the previous card was
aborted.
If continuing simultaneous recording spanning multiple
memory cards, set the overlap between memory cards in
menu item 160 INTER-MEDIA OVERLAP SELECT.
To stop the recording, press the STOP button.
• If you press the EJECT button to remove the SxS
memory card while recording, the recording to the card
stops, and the card is ejected. The recording to the
internal storage continues. The copying, due to
recording simultaneously to the SxS memory card,
temporarily stops. When the SxS memory card is
subsequently reinserted, copying to the SxS memory
card starts again from the beginning of the clip.
To stop the recording, press the STOP button.
• When recording to the internal storage becomes
impossible, the recording to the SxS memory card also
stops.
To adjust the audio recording levels
When carrying out audio recording at a reference
level
Set the VARIABLE switch to “PRESET”.
The audio signals will be recorded at a preset reference
level.
You can change the reference level and the input levels
with maintenance menu item M37: AUDIO CONFIG.
See page 133 for more information about how to make
maintenance menu settings.
Manually adjusting the audio recording levels
Set the VARIABLE switch to “REC” and use the CH-1/
ALL CH and CH-2 to CH-4 knobs to adjust CH-1 to CH-4,
and use A5 VOL to A8 VOL on page P3 AUDIO of the
function menu to adjust CH-5 to CH-8 so that the audio
level indications on the audio level meters do not exceed
0 dB for a maximum volume.
To set shot marks on the frame being
recorded when recording operation is
performed with the recording port selected
Shot marks can be set for clips being recorded in internal
storage. To set a shot mark, press the PUSH SET knob
while holding down the up or down arrow button when
recording operation is performed with the recording port
selected.
A shot mark 1 or 2 is set as an essence mark, respectively
on the frame being recorded.
You can set shot marks for clips being recorded in internal
storage when recording simultaneously to SxS memory
card or when recording simultaneously to Professional
Disc in XAVC format.
The shot marks can also be set during playback. For
details, see page 66.
Mixed recording of clips in different
formats on the same disc
The recording format is regarded as different whenever the
system frequency, video resolution, video codec/bit rate,
or number of audio channels or number of bits does not
match.
Mixed recording of clips in different formats on
the internal storage
You can record clips to the internal storage at different
system frequencies and in different formats (HD422/
HD420).
Mixed recording of clips in different formats on
the Professional Disc/SxS memory card
As long as the frame frequency group is the same, clips in
different recording formats can be recorded or written to
the same disc/memory card, for example HD422 and
HD420SP clips, by putting this unit into mixed format
recording mode.
