115
Setup Menu
Chap
te
r 7
Men
u
s
a) When the optional XDBK-105 is installed and maintenance menu item M397 PORT CONFIGURATION is set to “VTR mode”.
319
PREREAD SELECT
a)
Select the preread operation.
audio/video [a/v]:
Preread for both audio and video.
audio:
Preread for audio only.
video:
Preread for video only.
320
DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Specify the handling of audio at edit points.
cut
: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade
: Fade out and fade in.
329
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH5
a)
Select methods for setting the edit presets of the digital audio channels
CH5 to CH8 of this unit. Make these settings when using an editor
(PVE-500, BVE-600, etc.) or remote control unit without a function to
control digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
no definition [nodef ]:
No definition
analog ch1 [ch 1]:
Follow the edit preset of analog channel 1.
analog ch2 [ch 2]:
Follow the edit preset of analog channel 2.
analog ch1+ch2 [ch1+2]:
Follow the edit preset of analog channel 1 or
2.
330
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH6
a)
331
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH7
a)
332
ANALOG AUDIO EDIT PRESET
REPLACE FOR CH8
a)
Menu items in the 500s, relating to the disc drive
Item number Item name
Settings
501
STILL TIMER
To protect the media against shock and vibrations, and to lengthen the
life of the laser diodes, the unit automatically enters standby off mode
whenever a specified time elapses in a media stop mode (stop mode or
the still picture mode of search mode).
This allows you to set the time after which the unit exits a media stop
mode and enters standby off mode.
0.5 sec [0.5 s] to 8 min [8 m] to 30 min [30 m]:
Can be set in the range
from 0.5 seconds to 30 minutes.
off:
Do not put into standby off mode.
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name
Settings
601
VITC POSITION
SEL-1
a)
In 59.94i/59.94P/
29.97P mode
Select the line into which to insert VITC signals (SD output)
12H to 16H to 20H:
Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to “auto” and the
VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 20.
In 50i/50P/25P
mode
Select the line into which to insert VITC signals (SD output)
9H to 19H to 22H:
Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
Menu items in the 300s, relating to editing operations
Item number Item name
Settings
