Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 95 / 214

95
Scene Selection (Clip List Editing)
Chap
ter
5
Op
er
at
ions
in GUI
S
c
reen
s
The Set Start Time Code screen appears.
3
Press the
B
or
b
button to select the digit that you want
to change.
4
Turn the PUSH SET konb or the shuttle/jog dial to
change the value of the digit.
5
Repeat steps 3 and 4 as required.
To reset the timecode to 00:00:00:00
Select Reset to Zero in the Thumbnail Menu, and then
press the PUSH SET knob.
To preset the frequently used timecode
Select Save Preset TC in the Thumbnail Menu, and
then press the PUSH SET knob.
The timecode set in steps
4 and 5 is saved as a preset
value.
To recall the preset timecode
Select Recall Preset TC in the Thumbnail Menu, and
then press the PUSH SET knob.
6
Press the PUSH SET knob.
OK is selected.
7
Press the PUSH SET knob again.
8
Save the clip list (see page 95) .
To save clip lists
To save under a specified name
See page 78 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu.
2
Select Save Clip List as..., and then press the PUSH
SET knob.
A list of clip lists appears.
To switch the information displayed for clip lists
Press the b button.
With each press, the display changes in the order:
“Name & Date” >“Name & Title” >“Name & Sort
Date” >...
To sort clip lists
Select one of the following orders by selecting
Settings >Sort Clip List by... in the Disc Menu.
Name(A-Z): Sort in ascending order by clip list name.
Date(Newest First): Sort by date and time of clip list
creation, newest first.
3
Select the desired clip list name, and then press the
PUSH SET knob.
To save under the same name
The following procedure saves the current clip list under
its current name (the name that appears in the clip list
thumbnail screen).
See page 78 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu
(see page 77) .
2
Select Save Clip List, and then press the PUSH SET
knob.
The clip list is saved. However, Save Clip List as... is
executed when the name displayed in the clip list
thumbnail screen is “no name”.
If you press the EJECT button or move the on/standby
switch to the
1 position before saving a new or edited clip
list, a message appears asking if you want to discard your
changes and continue. Follow the instructions in the
message to continue or cancel the operation.
TC 2 2 : 3 4 . 5 6 : 1 7
Preset TC 00:00:00:00
OK
Cancel
Set Start Time Code
H M I N S E C F R M
Note
Save Clip List as...
E0003
E0004
E0005
E0006
E0007
E0095
E0098
Display Select
DVD og BI...
Name & Date/Sorted by Name
08 AUG2007 11:50
03 AUG2007 17:51
03 AUG2007 17:51
03 AUG2007 17:51
03 AUG2007 17:51
03 AUG2007 17:51
18 MAY2006 10:25
13 JUN2006 13:43
Disc Menu