Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 34 / 214

34
Display Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
n
s
o
f P
a
rts
2 Audio input display/Audio level meters
Displays information about audio. There are two display
modes for the audio level meter: FULL mode and FINE mode, which can be switched over using AU METER on
page P2 AUDIO of the function menu.
a
Input signal display
Displays the audio input signal.
.
a) When the PDBK-202 option board is installed
b
Data indication
Appears when the input signals are non-audio signals.
c
AGC/limiter
When analog signals are selected for audio input, displays
the AGC or limiter status.
AGC: An AGC value has been selected.
LIMIT: A limiter value has been selected.
d
Monitor channel
Displays the audio monitoring channels set with the
AUDIO MONITOR SELECT buttons
(see page 26) .
e
Audio channel
Displays the audio channels.
f
Reference level
Displays the reference level for recording as set in the
maintenance menu.
g
MIX (mixing)
1)
Appears when a channel has been specified as an output
destination. This indication appears when mixing has been
set up with item 843 AUDIO OUTPUT ARRANGE
1)
in
the setup menu, and MIX/SWAP
1)
on the P2 AUDIO page
of the function menu has been set to “ON”.
1 Input signal display
2
Data indication
5
Audio channel
6
Reference level
8 Level bar
4 Monitor channel
9 Meter display mode
Meter display mode: FULL Meter display mode: FINE
3
AGC/limiter
7 MIX indication
Display Input signal
ANA-1 Analog audio
signal Channel 1
ANA-2 Channel 2
ANA-3 Channel 3
ANA-4 Channel 4
MIC-1 Input signal from
the microphone
connected to
ANALOG AUDIO
INPUT connector Channel 1
MIC-2 Channel 2
MIC-3 Channel 3
MIC-4 Channel 4
HD-SDI HDSDI audio signal (flashes when there is
no input signal)
SD-SDI SDSDI audio signal (flashes when there is
no input signal)
SG Test signal from the internal signal
generator
iLINK
a) i.LINK TS (HDV) audio signal
DVB-ASI
a) DVB-ASI TS audio signal
No indication Undefined audio signal, or no audio input