Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 133 / 214

133
FTP File Operations
Chap
te
r 7
F
ile
Op
er
at
ions
Exiting file operations
Proceed as follows.
Do not disconnect the cable before performing steps 1 and
2 .
1
Eject the disc by clicking the eject button to the right
of the icon for this unit in the Finder, or by dragging
the icon for this unit from the Finder to the Trash.
2
Press the PC REMOTE button, turning it off. (This
disables remote access
(see page 23) .)
To make a reconnection
Press the PC REMOTE button, lighting it.
This makes it possible to access this unit from a computer.
FTP File Operations
File operations between this unit and a remote computer
can be carried out by the File Transfer Protocol (called
FTP below).
Preparations
1
Connect the network connectors of this unit and a
remote computer with a network cable
(see
connections illustration on page 44) . Or connect this
unit to the network to which the remote computer is
connected
(see connections illustration on page 44) .
2
Set the IP address and other network setting items for
this unit.
1)
For details, see “To change network settings”
(page 169).
If network settings have already been made
Check the IP address of this unit.
For details, see “To check the assigned IP address”
(page 169).
1) This unit is able to acquire an IP address automatically from a DHCP
server. It also supports an Auto-IP function to assign an IP address
automatically when access from this unit to the DHCP server times
out. You can check DHCP settings and the assigned IP address on
page M5:NETWORK of the maintenance menu.
If this unit is directly connected to a computer running
Windows Vista with a network cable, change the
setting as follows:
(1) Open “Network and Sharing Center” >“Manage
network connections” >“Local Area Connection” in
the control panel. (2) In the “Local Area Connection
Properties”, uncheck the “Internet Protocol Version 6
(TCP/IPv6)”, and then click the OK button.
3
Set the remote control switch to “NET” (see page 23) .
Making FTP connections
FTP connections between this unit and a remote computer
can be made with either of the following.
• The command prompt
• FTP client software
This section explains how to use the command prompt. For
more information about using FTP client software, refer to
the documentation of the FTP client software on your
system.
Note
Note