Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 68 / 214

68
Playback
C
h
ap
te
r 4
R
e
c
o
rd
in
g
an
d
P
la
y
ba
c
k
720) do not match, then the formats before and after
conversion appear in the HDSDI output conversion
display
(see page 35) and disc playback is cross converted
automatically. E-E output is not cross converted.
SD up convert function
You can output HD while playing discs recorded as SD.
HD down convert function
You can always output SD while playing discs recorded as
HD.
To specify the frame to use as the
thumbnail image
You can display a list of thumbnails of all clips on a disc,
and use it to check the recorded content
(see page 79) .
When the unit is shipped from the factory, it is set up to
display the first frame of each clip as the thumbnail. As
required, you can select another frame to display as the
thumbnail.
For example, if there are several seconds of color bars
recorded at the start of the clip, selecting a frame several
seconds after the end of the recording of color bars can
make it easier to identify the clip.
The GUI screen allows you to select thumbnail frames
while viewing the video.
For details, see “Changing clip index pictures” (page 84).
You can also use setup menu item 143 INDEX PICTURE
POSITION to specify a different default frame. You can
specify the initial frame in any of the first few seconds
after the initial frame. The setting range is 0 seconds to 10
seconds.
Playback operation
This section describes the following types of playback:
Normal playback: Playback at normal speed
Playback in jog mode: Variable-speed playback, with the
speed determined by the speed of turning the shuttle/
jog dial
Playback in shuttle mode: Variable-speed playback, with
the speed determined by the angular position of the
shuttle/jog dial
Playback in variable-speed mode: Variable-speed
playback, with the speed finely determined by the
angular position of the shuttle/jog dial
Normal playback
First insert a disc.
For details of how to insert a disc, see “Loading and
unloading a disc” (page 61).
To start playback
Press the PLAY button.
Playback starts.
When two or more clips are recorded on the disc, they are
played back continuously.
No audio is output when non-audio signals are played
back.
To jump to the next or previous clip, then start
playback
Use the PREV button, NEXT button, or shuttle/jog dial.
To pause playback
Press the PAUSE button.
Press it again to resume playback.
To stop playback
Press the STOP button.
If you play back to the end of the last clip, playback
automatically stops.
If, in this state, you press the PLAY button, the message
“Disc End!” appears on the display.
To carry out playback again, move back to the desired clip
using the PREV button, or shuttle/jog dial.
To set shot marks
While playing back a disc, you can set essence marks such
as Shot Mark1 and Shot Mark2 in desired frames.
Note
PREV button
PLAY button
NEXT button
STOP button
PAUSE button
PUSH SET knob
Shuttle/jog dial
V /MARK1 button and v /MARK2 button