manualshive.com logo in svg

Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 183 / 214

Поделиться
Скачать
Sony XDCAM PDW-HR1 Скачать руководство пользователя страница 183

183

Troubleshooting

  

A

ppe

ndix

During edit list editing operations

Some alarms are not displayed when the PDBZ-UPG03 
Software Upgrade Key or PDBK-MK1 option board is not 
installed.

CHAPTER DOES NOT 
EXIST.

The specified chapter has not been recorded.
This appears when an attempt is made to display a chapter when a chapter has not been 
recorded for that clip.

SOME ESSENCE MARK 
CANNOT BE DELETED.

The Rec Start essence mark cannot be deleted.
This appears when an attempt is made to delete a Rec Start with a Delete Shot Mark operation. 
Delete Shot Mark can delete only Shot Mark1 and Shot Mark2 marks.

SOME ESSENCE MARK 
CANNOT BE MOVED.

Rec Start essence mark cannot be moved.
This appears when an attempt is made to move a Rec Start with a Move Shot Mark operation. 
Move Shot Mark can move only Shot Mark1 and Shot Mark2 marks.

CLIP IS LOCKED.

The clip is locked.
This appears when an attempt is made to delete a clip, set the clip thumbnail, or delete a shot 
mark when the clip is locked. 

ALL CLIPS ARE LOCKED.

All clips are locked.
This appears when an attempt is made to execute a Lock All Clips operation when all clips are 
already locked.

ALL CLIPS ARE 
UNLOCKED.

All clips are unlocked.
This appears when an attempt is made to execute an Unlock All Clips operation when all clips 
are already unlocked.

COMMAND DISABLED.

This appears when an attempt is made to perform Format Disc operation while Setting Format 

Disc is set to “Disable”.

A FILE WITH THE NAME 
YOU SPECIFIED ALREADY 
EXISTS. SPECIFY A 
DIFFERENT NAME.

This appears when an attempt is made to set an existing clip name while changing the clip name 
using Set Clip Name.

SET NAMING FORM TO 
“FREE”

This appears when an attempt is made to change the clip name using Set Clip Name even 
though NAMING FORM is not set to “free” 

(see page 128)

.

“NO FLASH DRIVE”

This appears when an attempt is made to select “USB Flash Drive” in the media selection 
screen under Load Planning Metadata/Select Drive even though the USB memory is not 
connected.

NO CLIP IS RECORDED.

There are no clips on the disc.
This appears when an attempt is made to execute a Lock or Delete All Clips operation when 
there are no clips on the disc.

NO VOICE IS RECORDED.

There are no voice data on the disc.
This appears when an attempt is made to execute a Delete All Voice operation when there are 
no voice data on the disc.

Alarm message in GUI 
screen

Description/action

Note

Alarm message in GUI screen

Description/action

EDIT POINT IS INVALID.

A preview or auto edit failed because of an invalid edit point setting.
This appears when, for example, an Out point is set before an In point. Reset the 
edit point.

SYNCHRONIZE WAS NOT 
COMPLETED.

A preview or auto edit failed because of a synchronization error.
This appears when synchronization fails because, for example, the preroll time was 
too short or timecode breaks were encountered. Check the preroll time setting, and 
check for timecode breaks.

PREROLL WAS NOT COMPLETED.

A preroll or auto edit failed.
This appears when the unit attempts to preroll to timecode that does not exist. 
Check the preroll time setting and the timecode.

Содержание XDCAM PDW-HR1























































































































































































































Отзывы:

Нет отзывов