Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 139 / 214

139
Recording Continuous Timecode with FAM and FTP Connections
Chap
te
r 7
F
ile
Op
er
at
ions
Recording Continuous
Timecode with FAM and
FTP Connections
When you are connected to the unit by FAM or FTP, you
can create new clips with timecode that is continuous with
the timecode of the last frame of the last clip on the disc.
To record continuous timecode, set the INT/EXT/SDI
switch to “INT”, and set the PRESET/REGEN switch to
“REGEN TC”. Then proceed as follows.
Continuous timecode cannot be recorded if the PRESET/
REGEN switch to “REGEN VITC”.
See page 145 for more information about setup menu
operations.
FAM connection
Write clip files to the unit from the computer or other
device that is connected to this unit.
FTP connection
Use the “STOR” command to transfer clip files from the
computer that is connected to this unit.
If you issue the “SITE UMMD” command immediately
before the “STOR” command, the original timecode of the
transferred file is recorded, regardless of the setting of the
INT/EXT/SDI switch.
Note