Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 60 / 214

60
Handling Discs
Ch
apt
er 3 Prep
ar
at
ion
s
Handling Discs
Discs used for recording and
playback
This unit can record and play back the following
Professional Disc
1)
formats.
• PFD23A (capacity 23.3 GB)
• PFD50DLA (capacity 50.0 GB)
1) Professional Disc is a trademark of Sony Corporation.
• It is not possible to use the following discs for recording
or playback:
- Blu-ray Disc
- Professional Disc for Data
• PFD50DLA discs can be used only by XDCAM devices
with the DL mark (see the following illustration) . They
cannot be used by XDCAM devices without this mark.
Notes on handling
Handling
The Professional Disc is housed in a cartridge, and is
designed to allow handling free of risk from dust or
fingerprints. However, if the cartridge is subjected to a
severe shock, for example by dropping it, this can result in
damage or scratching of the disc. If the disc is scratched, it
may be impossible to record video/audio, or to play back
the content recorded on the disc. The discs should be
handled and stored carefully.
• Do not touch the surface of the disc itself within the
cartridge.
• Deliberately opening the shutter may cause damage.
• Do not disassemble the cartridge.
• The supplied adhesive labels are recommended for
indexing discs. Apply the label in the correct position.
Storage
• Do not store discs where they may be subjected to direct
sunlight, or in other places where the temperature or
humidity is high.
• Do not leave cartridges where dust may get inside.
• Store cartridges in their cases.
Care of the discs
• Remove dust and dirt on the outside of a cartridge using
a soft dry cloth.
F3: CLIP FLG Sets a clip flag for the clip being
recorded or played back using the
function button.
If a clip flag is already set for the clip,
“Marked” is displayed in the function
menu item corresponding to one of the
F1 to F3 buttons depending on the type
of flag that has been set.
A clip flag can also be set or deleted
using the GUI screen. See page 87 for
details.
Sub-item
F1: OK Set an OK flag.
F2: NG Set an NG flag.
F3: KEEP Set a KEEP flag.
F4: –
F5: DELETE Delete the clip flag.
F6: EXIT Exit the clip flag sub-
menu.
F4: LIGHT Turns the control panel illumination LED
on and off.
OFF: Off
ON: On
F5: (Unassigned function button)
F6: (Unassigned function button)
Item Setting
Notes
DL mark