56
VGX-XL1 Digital Living System
11
Follow the directions on the screen and in the PCI expansion card user's
manual once the message "Windows has found new hardware and is
installing the software for it." displays after starting Windows.
To remove the expansion card
If it becomes necessary to remove the PCI expansion card, reverse the
installation procedures to remove the card. Turn off the power to the
computer, any peripheral devices, and remove the power cord and all cables
connecting peripheral devices before removing the expansion card.
Adding Memory
Memory can be upgraded using the expansion memory slot inside this device.
Upgrading memory increases the data processing speed and allows faster
response time when running multiple programs at the same time.
There are 4 slots available in this device to install memory modules and it can
be upgraded to a total of 2 GB. Upgrade the memory by installing memory
modules sold separately.
Safety Information
Please read the following safety information before installing a memory
modules.
•
Please be careful not to get cut by the parts or the circuit board inside this
device when installing the memory.
•
Be careful not to catch your fingers on the cables inside this device and
remove or dislodge the cable when installing the memory.
•
Turning the power on with a foreign object (metal, such as a screw) left
inside the device at the time of upgrading the memory may cause damage.
Always remove any foreign objects and replace the cover before turning
the power on.
•
Don't touch the electronic components on the circuit board of this device.
They are susceptible to pressure and static, which may cause a failure.
Note
: A driver is software that is necessary to properly operate the peripheral
device, notifying the computer of what type of peripheral device is connected
in what way. A driver may need to be installed if an expansion card is
upgraded.
Chp3.fm Page 56 Thursday, November 10, 2005 11:53 AM
