VGX-XL1 Digital Living System
65
•
Always install or remove a hard disk after pulling the power cord of this
device or the peripheral device from the power outlet. Installing or
removing the hard disk with the power cord still plugged in may cause
damage to the hard disk, this device, or a peripheral device.
•
The inside of this device may be hot right after the power is turned off and
may cause burns. Please wait to work until the device has cooled off.
•
The drive number for the upgraded hard disk may vary depending on the
environment you use ("Local disk (E:)" or "Local disk (F:)" may be
displayed). Also, please note that the drive number for the upgraded hard
disk may change when recovering this device.
•
Recorded video is saved to the C: drive, by default.
To Add / Upgrade a Hard Disk
1
Turn off the power to this device and all peripheral devices, and remove the
power cord and all cables connecting peripheral devices. Some inside
components may be hot. Wait approximately one hour before proceeding to
work.
2
Remove the upper cover. Remove the screws in the rear and slide the cover
off.
Chp3.fm Page 65 Thursday, November 10, 2005 11:53 AM
