Sony SLV-D900E, Руководство по обслуживанию

Страница: 25 / 91

1-20
84
Recording stereo and bilingual programs
Recording stereo and bilingual programs
In the NICAM system
This VCR receives and records stereo and bilingual programmes based on the
NICAM system (NICAM appears on the TV screen). When a stereo or bilingual
programme is received, the STEREO indicator appears in the display window.
To record a NICAM programme, “NICAM” in the “USER SET” menu should be set
to ON (initial setting). To check the menu setting, see page 95 for details.
To select the sound while recording
Press AUDIO to select the sound you want.
* Usually the mixed sound of left and right channels
* Usually the main sound (monaural)
Selecting the sound during Hi-fi playback
Press AUDIO to select the sound you want.
* The mixed sound of left and right channels, and the normal mono audio track
Stereo programmes
To listen to On-screen display Display window
Stereo NICAM, STEREO STEREO
Left channel NICAM, LCH STEREO
Right channel NICAM, RCH STEREO
Left and right channels* NICAM, LCH + RCH STEREO
Bilingual programmes
To listen to On-screen display Display window
Main NICAM, MAIN STEREO
Sub NICAM, SUB STEREO
Main and sub NICAM, MAIN/SUB STEREO
Standard sound* NICAM, MONO STEREO
To listen to On-screen display Display window
Stereo STEREO STEREO
Left channel LCH STEREO
Right channel RCH STEREO
Mix sound* MIX STEREO
Mono sound MONO No indicator
85
Recording stereo and bilingual programs
VCR Ad
ditio
nal Ope
ration
s
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Notes
• To listen to playback sounds in stereo, you must use the Scart or AUDIO OUT connections.
• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO setting.
Stereo
Usually mixed
left/right channels
Bilingual
Usually main sound
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound
(left/right channels) Main (left channel)
Sub (right channel)
86
Searching using index function
Searching using index function
To find a specific recording by scanning (Index scan)
The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
1
Insert an indexed tape into the tape compartment.
2 Press INDEX, then press
m / M
. The
VCR starts scanning each recording for five
seconds in the corresponding direction.
3 Press
H
to start playback when you find the desired point.
INDEX
H
m/M
x
INDEX
INDEX SCAN
B B
:
87
Searching using index function
VCR Ad
ditio
nal Ope
ration
s
To search a specific recording (Index search)
To stop searching
Press
x
.
Note
• No index signal will be added when recording starts from recording pause. However, an
index signal will be marked if you change the programme position during recording pause.
1 Insert an indexed tape into the VCR.
2
Press INDEX, then press
m / M
twice.
• To search ahead, press
M
twice.
• To search backwards, press
m
twice.
3
Press
m / M
depending on the direction where your desired programme
is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
4
The VCR starts searching, and playback starts automatically from that
point.
INDEX
INDEX SEARCH +01
B B
: