Sony PCS-1500, Руководство по обслуживанию

Страница: 31 / 198

1-23
PCS-1500/1500P
44
Chapter 2 Basic Operation During a Meeting
Chapter 2
To recall a preset
1
Press one of the letter buttons (A to F) on the Remote
Commander.
The camera is automatically adjusted by the preset under
the selected letter.
On backup
The memories of the preset are erased when the POWER
switch on the Compact Processor is set to off. To retain those
memories, set the BACKUP switch at the rear of the camera to
ON.
Notes
• In the camera, the built-in lithium battery acts as the power
source for retaining the memories and is kept charged as long
as the system is used. If the system is used for shorter period
of time with the BACKUP switch set to ON, however, the
battery is gradually discharged. Besides if you do not use the
system at all for almost 12 weeks, the battery is completely
discharged. To retain the memories of the settings, you should
recharge the battery.
• To recharge the battery, connect the camera to the Compact
Processor and leave it for approximate 48 hours with the
POWER switch set to on.
Tracking a Subject Automatically — Automatic Target
Tracking Function
You can have the camera memorize a particular color or
brightness so that automatically tracks a subject having the
memorized color or brightness.
If a subject almost goes off the screen, the camera performs the
pan/tilt action so that the subject is placed back in the middle of
the screen.
Note
The automatic target tracking function is only available for the
local camera.
Adjusting the Camera
Chapter 2 Basic Operation During a Meeting
45
Chapter 2
1
Press the AUTO TRACK button on the Remote
Commander.
The Auto Tracking menu and the frame appear on the
monitor screen.
2
Press the CAMERA (
V
/
v
/
B
/
b
) buttons on the Remote
Commander to place a subject into the frame.
Notes
• Be sure to place the subject so that the portion uniform in
brightness and color is in the frame.
• The camera might not recognize a subject if the portion
different from the subject in brightness and color, such as
the backdrop, is placed together in the frame.
3
Press the EXEC button on the Remote Commander.
The indication appears on the monitor screen.
The automatic target tracking function starts and the frame
disappears from the monitor screen.
To cancel the automatic target tracking function
Press the AUTO TRACK button on the Remote Commander to
display the Auto Tracking menu, then press the CANCEL
button.
The indication disappears from the monitor screen.
START: EXEC END: CANCEL
Auto Tracking