Sony PCS-1500, Руководство по обслуживанию

Страница: 25 / 198

1-17
PCS-1500/1500P
32
Chapter 2 Basic Operation During a Meeting
Chapter 2
Answering Calls in Manual Answer Mode
When your system is in manual answer mode, you need to
connect incoming calls manually.
When a call comes in, the Compact Processor starts ringing,
and the indication “Incoming Call Answer?” appears on the
monitor screen.
1
Press the EXEC button on the Remote Commander.
Once the connection has been made, the remote party
appears on the local monitor screen, and local party
appears on the remote screen. You are now ready to hold
your meeting.
The indication “MEETING STARTS!” appears on the
monitor screen.
If you do not want to receive a call
Press the CANCEL button on the Remote Commander.
The Compact Processor stops ringing.
If you are operating the system when a call comes in
The indication “PLEASE CLOSE THIS MENU” appears on
the monitor screen. If you receive the call, finish the current
operation. If you cannot receive the call according to your
current operations, ignore it and continue with the current
operation.
When the system fails to make a connection
The indication “CANNOT COMPLETE CONNECTION”
appears along with an ISDN cause code and a message on the
monitor screen.
For details on ISDN cause codes and messages, see “On
Screen Messages” on page 95.
Receiving a Call
Chapter 2 Basic Operation During a Meeting
33
Chapter 2
Checking the Connection Status
Communication Status 00:05
CODEC
LINE I/F
RATE
AUDIO MODE
VIDEO MODE
FRAME RATE
CAMERA CONTROL
DATA CONTROL
:
:
:
:
:
:
:
:
H.320
BRI
1 x 64K
(Encode)
G.728
H.263 CIF
15
OFF
OFF
(Decode)
G.728
H.263 CIF
15
Exit: CANCEL
During a meeting, you can check the status of the
communication. Elapsed time also appears on the monitor
screen during a meeting.
1
Press the MENU button on the Remote Commander.
The Menu (System Configuration Index 1/3) menu appears
on the monitor screen.
2
Select the COMMUNICATION STATUS with the joy
stick, then press it.
The Communication Status menu appears on the monitor
screen.
3
Check the status:
CODEC: Displays the codec system.
LINE I/F: Displays the line interface being used.
RATE: Displays the number of lines and the transfer rate
being used.
AUDIO MODE (Encode): Displays the audio encoding
system at the local system.
AUDIO MODE (Decode): Displays the audio decoding
system at the local system.
VIDEO MODE (Encode): Displays the video encoding
system at the local system.
VIDEO MODE (Decode): Displays the video decoding
system at the local system.