Sony MDDISCAM DCM-M1, Руководство по обслуживанию

Страница: 186 / 198

– 12 –
5. Flange Back Check
Switch setting
1) DIGITAL ZOOM (Menu screen) ....... OFF
2) STEADY SHOT (Menu screen) ......... OFF
3) FOCUS ................................................ AUTO
Note: When Auto Focus is ON, whether the focus is in order or disordered can be judged from the data displayed on page 01.
1) Select page: 06, address: 04, and set data: 0F, then press the
y key.
2) The focusing condition can be confirmed from the data displayed on page 01.
01-00-XX
Odd number : Focus is in order.
Even number : Focus is disordered.
Checking method
Steps
Page Address Data Work Description
1
Place the Siemens star at 2.0 m forward position from the lens front surface. As the iris is
in open state, lower the luminance of Siemens star to the extent that noise does not appear
on the monitor TV.
2 Shoot the Siemens star with the zoom at TELE end.
3 Check that the focus is in order. (Note)
4 06 21 10 Press the y key.
5 Shoot the Siemens star with the zoom at WIDE end.
6 Check on the monitor screen that the focus is in order.
Processing after completion of check
Steps
Page Address Data Work Description
1 06 21 00 Press the
y
key.
2 06 04 00 Press the
y
key.
Subject
Siemens star (reflection type)
(Located at 2.00 m position from lens front surface)
(Luminance: about 200 lux)
Measurement point Check on monitor TV
Measuring instrument (Camera-through screen)
Adjustment value Focus must be in order at TELE end and WIDE end