Sony MDDISCAM DCM-M1, Руководство по обслуживанию

Страница: 154 / 198

– 14 –
Faulty item checking method
1) From the adjustment status display screen at “NG” (Fig.7-1-
19), read a 2-digit number at part “A”.
Example: On the following screen, if adjustment finished, “78” is
displayed.
Fig.7-1-20
2) Move over major item to Drive (item number: 4).
3) Set medium item number to higher digit of the number read in
step 1).
Example: If the read number is “78”, medium item number is 7.
4) Set minor item number to lower digit of the number read in
step 1).
At this time, the medium item name and minor item name on
the screen indicate the adjustment item names where an error
occurred during servo auto adjustment.
Example: If the read number is “78”, minor item number is 8.
Fig.7-1-21
Then, from the medium item name and minor item name, you
can confirm that a fault occurred in “MD1 GRV F-BIAS
(ADIP)” item of the “MD1 GRV adj”.
TEST MODE
Servo
made by MD dep.
I TRON Ver.
s
.
sss
Drive Ver. s . sss
JAVA APP Ver.
ssssssss
JAVA OS Ver. ssssssss
BOOT Ver. s . sss
I PL Ver. s . sss
RATE CTL Ver. s . sss
Item No.
All Adjust START
8–01–01
Servo Common
: 6C0 DATA : 00 00 00 30 00 00 00 00
NG
NG. 78 ss
TEST MODE
Drive
0790
made by MD dep.
I TRON Ver. s . sss
Drive Ver.
s
.
sss
JAVA APP Ver. ssssssss
JAVA OS Ver.
ssssssss
BOOT Ver. s . sss
I PL Ver. s . sss
RATE CTL Ver.
s
.
sss
Item No.
MD1 GRV F-BIAS (ADIP)
4–07–08
MD1 GRV adj
: 6C0 DATA : 00 00 00 30 00 00 00 00