EN
1VMN23765 / E9G05BD
EN
Produced for ASDA Stores Ltd., LEEDS LS11 5AD
Congratulations on your purchase of a DVD Recorder with Video Cassette Recorder. This Quick Setup Guide takes you through the first-time setup with simple
instructions so you can enjoy exceptional audio and video quality as soon as possible. Please refer to the Owner’s manual for detailed instructions. If you have
read your instructions and still need assistance, call ASDA helpline at
0845-300-7775
. Unless stated, all procedures described use the remote control.
Playable Discs
Recordable Discs
Using the Scart jack
Using the S-VIDEO OUT jack and the AUDIO OUT jacks (only for DVD)
Finalising a Disc
DVD Playback
Finalise
You must first finalise the disc before playing it back on other unit.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “DVD Menu” using [
U
/
D
], then press
[ENTER].
3
Select “Finalise” using [
U
/
D
], then press
[ENTER].
4
Select “Yes” using [
U
/
D
], then press [ENTER].
Finalising will start.
• This operation may take awhile to be completed.
• If you insert a DVD-RW disc finalised with this unit, “Undo
Finalise” will appear instead of “Finalise”. To Undo the
finalisation of the disc, select “Undo Finalise” and press
[ENTER]
.
Direct Playback
1
Press [STANDBY-ON] to turn on the unit.
Turn on the TV and be sure to select the input to which the
unit is connected.
2
Press [DVD ].
3
Press [OPEN / CLOSE
O
] to open the disc tray.
4
Place the disc on the disc tray with its label facing
up. Be sure to align the disc with the disc tray
guide.
5
Press [OPEN / CLOSE
O
] to close the disc tray.
6
Press [PLAY
P
] to start playback.
Playback will start.
• Depending on the media, the playback may start from a
resume point. (See page 43 on the Owner’s Manual for
details.)
• If you are playing back a DVD-Video, a Disc Menu may
appear. Refer to page 42 on the Owner’s Manual for more
details about the Disc Menu.
7
Press [STOP
S
] to stop playback.
Note
• Some discs may start playback automatically.
VCR Playback / Recording
Playback
1
Press [STANDBY-ON] to turn on the unit.
To play back a tape, turn on the TV and be sure to select the
input to which the unit is connected.
2
Press [VCR
].
3
Insert a pre-recorded tape, then press [PLAY
P
] to
begin playback.
4
During playback, press [PAUSE
p
].
Playback will be paused and sound will be muted.
5
Press [PLAY
P
] to resume playback.
6
Press [STOP
S
] to stop playback.
7
Press [OPEN / CLOSE
O
] to eject the tape.
Note
• When a tape without record tab is inserted, the unit will start playback
automatically.
• Tracking will be automatically adjusted upon playback. To adjust the
tracking manually, press
[PROG.
K
/
L
]
.
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons]
or
[PROG.
K
/
L
]
on the remote control.
• There is a tape with a record tab in the unit.
• The desired recording speed is selected in SP (standard play) or LP
(long play) mode by pressing
[REC SPEED]
on the remote control.
1
Turn on the unit and insert a recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR
].
3
Press [REC / OTR] to start recording.
To temporarily stop recording or to resume it, press
[PAUSE
p
]
.
After the unit has been in pause mode for 5 minutes, it will
stop automatically to protect the tape and the video head from
damage.
4
Press [STOP
S
] when the recording is completed.
SETUP
ENTER
ENTER
Format
Finalise
Disc Protect OFF ON
Delete All Playlists
Finalise disc?
Yes
No
OPEN/CLOSE
STOP
PLAY
STANDBY-ON
DVD
OPEN/CLOSE
Disc tray guide
VCR
PAUSE
PLAY
PLAY
STOP
STANDBY-ON
OPEN/CLOSE
Tape speed
Recording / Playback Time
Type of tape
E60
E120
E180
E240
SP mode
1 hour
2 hours
3 hours
4 hours
LP mode
2 hours
4 hours
6 hours
8 hours
STOP
REC/OTR
VCR
Recording and Playback Information
Disc
Logo
Disc
Logo
Disc type
Disc format
Functions
DVD-Video
DVD-RW
(VIDEO/VR mode)
Video mode
Playing back, Limited
recording, Limited editing
VR mode
Playing back, Recording,
Original / Playlist editing
DVD-R
(VIDEO mode)
CD-DA
(AUDIO CD)
Video mode
Playing back, Limited
recording, Limited editing
CD-R
(CD-DA FORMAT,
MP3, JPEG files)
CD-RW
(CD-DA FORMAT,
MP3, JPEG files)
This unit can play back DVD discs labelled with the
following region codes only:
Kodak Picture CD
Connecting to a TV
Connect AV1 (TV) Scart jack of this unit to
the Scart jack of your TV.
Use the supplied Scart cable.
Note
• If your TV does not have a Scart jack, use a
commercially available Scart adaptor or Scart /
RCA cable to connect.
• Connect this unit directly to the TV. If the AV
cables are connected to a VCR, pictures may
be distorted due to the copy protection
system.
If your TV has an S-Video input jack, use
S-Video and Audio cables to connect.
1
Connect S-VIDEO OUT jack of this
unit to the S-Video input jack of your
TV. Use a commercially available
S-Video cable.
2
Connect the AUDIO OUT jacks of
this unit to the analogue Audio input
jacks of your TV. Use a commercially
available Audio cable.
Note for a TV with no S-Video input jack or Scart jack:
• This unit has no RF modulator, so this type of TV cannot be used.
QUICK SETUP GUIDE
for ADB2737BDS
2
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
DVD/VCR
AV2(DECODER)
AUDIO
OUT
OUT
IN
L
R
S-VIDEO
OUT
AV1(TV)
DVD
ANTENNA
Cable
Signal
or
Scart cable (supplied)
To Aerial jack
Audio/Video cable (not supplied)
Scart/RCA cable
(not supplied)
Scart adaptor
(not supplied)
TV
Antenna
RF cable
(not supplied)
RF cable
(supplied)
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
DVD/VCR
AV2(DECODER)
AUDIO
OUT
OUT
IN
L
R
S-VIDEO
OUT
AV1(TV)
DVD
ANTENNA
AUDIO IN S-VIDEO IN
Antenna
or
RF cable
(not supplied)
RF cable
(supplied)
TV
To Aerial jack
Cable
Signal
Audio cable
(not supplied)
S-Video cable
(not supplied)
E9G05BD_QSG_EN.fm Page 1 Wednesday, April 11, 2007 9:57 AM
