Sony IPELA SNC-RZ30N, Руководство по обслуживанию

Страница: 40 / 128

2-18
SNC-RZ30N/RZ30P (E)
Processing after Completing Adjustments
1) Select page: 6, address: 01, and set data: 00, and press
the PAUSE button of the adjusting remote commander.
2) Select page: 0, address: 03, and set data: 00, and press
the PAUSE button of the adjusting remote commander.
3) Select page: 0, address: 01, and set data: 00.
m
.
The adjustment data will be automatically input to page:
F, addresses: 42 and 43.
. Data input of “9. AWB Adjustment” is possible during
turn on the power at only once.
10. Optical Axis Correction Adjustment
Adjust the optical axis to proper position between lens and
CCD image sensor.
n
Before adjustment, make sure that confirm the following
item.
1.
Digital Zoom: OFF, Camera stabilizer: OFF
Subject Clear chart
Measurement Point Pin
@/
of CN901
Measuring instrument TV monitor and Adjusting remote
commander
Adjustment Page F
Adjustment Address 60
Adjusting method
1) Set the zoom lens to TELE end and shoot the clear
chart that the black circle of 9.0
±
1.5mm in diameter is
stuck at center of the chart.
2) Set the lens to WIDE end.
3) Detect the immovable point during zooming, detect the
incorrect direction toward center of the screen.
4) The following shows that the data input value toward
to the incorrect direction.
Out of Phase Input data
22.6 d C - 67.5 d C 01
67.6 d C - 112.5 d C 02
112.6 d C - 157.5 d C 03
157.6 d C - 202.5 d C 04
202.6 d C - 247.5 d C 05
247.6 d C - 292.5 d C 06
292.6 d C - 337.5 d C 07
337.6 d C - 22.5 d C 08