Sony IPELA PCS-HG90, Руководство по эксплуатации

Страница: 90 / 200

90
Receiving a Call from a Remote Party
See pages 92 to 108 to adjust the sound and picture during a communication.
To receive a call in manual answer mode
When you receive a call, the Communication Terminal rings and the message
“Incoming call. Answer?” appears on the monitor screen.
Press B or b on the Remote Commander to select “OK”, then press the PUSH
ENTER button. The system is then connected. Once the connection is made,
the picture of the remote party is displayed on the local monitor screen and the
sound is heard. The picture and sound on the local site will be enabled on the
remote site at the same time.
The message “Session Connected” appears on the monitor screen.
You are now ready to start a communication.
See pages 92 to 108 to adjust the sound and picture during a communication.
When you do not want to answer the call
Press B or b to select “Cancel”, then press the PUSH ENTER button. Ringing
stops.
To display the elapsed communication time
You can display the elapsed communication time on the monitor screen if
“Time Display” in the General Setup menu is set to “On”.
To turn off the indicator, set “Time Display” in the General Setup menu to
“Off”. To turn off the indicator during communication with a remote party,
select “Indicator” in the launcher menu and remove a check mark.
For “Time Display” setting, see “General Setup Menu” on page 48.
Note
Note