141
Using the Display Control
C
h
apt
er
6:
M
u
lti
p
o
int
C
o
nn
ect
ion
Using the Display Control
During a multipoint connection you can control the following operations.
You can use the “Voice Activate” and “Broadcast” modes.
Voice Activate mode
Detects the terminal with the speaker with the loudest voice among the
connected terminals, and displays the picture of that terminal in full screen on
all the sites. The
indicator with alphabet showing the terminal of the
displayed picture also appears. The
indicator is displayed while the local
picture is broadcast.
Broadcast mode
You can specify the terminal to display the picture of that terminal in full
screen on all the sites. The
indicator with alphabet showing the terminal
of the displayed picture also appears. The
indicator is displayed while the
local picture is broadcast.
You can change the mode broadcast during communication.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select
“Broadcast Mode”, then press the PUSH ENTER button.
Voice Activate:
Selects the Voice Activate mode.
Self Broadcast:
Broadcasts the near end (local) party in the Broadcast
mode.
What is “Broadcast Mode”?
Switching the Broadcast Mode
A
A
Far
Display
Near Camera
Control
Voice Activate
Broadcast Mode
Display Control
Содержание IPELA PCS-HG90
Страница 108: ...108 Monitoring the Local and Remote Pictures at the Same Time PandP Side by Side ...
Страница 200: ...Sony Corporation ...