background image

150

How to use “Dial/Disconnect”

To connect:

1

Select “Multipoint” for “Dial Mode”.

2

Enter IP addresses or DNS names of remote parties into boxes A to C.

3

Set the communication attributes.

4

Click the [DIAL] button.

5

The message, “Now dialing…” appears.

6

After the connection is made, the message, “Connect OK.” will appear, and 
the screen will return to the “Dial/Disconnect” page.

To disconnect (all remote parties at once):

1

Click the [DISCONNECT] button.

2

The message “Now disconnecting…” appears.

3

After the disconnection is complete, the message, “Disconnect OK.” will 
appear, and the screen will return to the “Dial/Disconnect” page.

To disconnect (one party at a time):

1

Click the button (Disconnect A to C) that corresponds to the party you wish 
to disconnect.

2

The message “Now disconnecting…” appears.

3

After the disconnection is complete, the message, “Disconnect OK.” will 
appear, and the screen will return to the “Dial/Disconnect” page.

To clear the dial number:

1

Click the [CLEAR] button.

2

The number(s) entered on this menu will be cleared and the screen will 
return to the “Dial/Disconnect” page.

For Multipoint Connection

Содержание IPELA PCS-HG90









































































































































































































Отзывы: