68
Setting Up the Network Configurations
To connect
Select “Single” under “Dial Mode”, enter the user name or user number set by
the remote party, and dial.
Connection using NAT allows one IP address to be shared by several
computers on the same LAN. This section describes how to set up for a video
communication conducted in NAT and global IP environments.
Configuration example
1
Enter a name in “Host Name” under Page 1/2 of the General screen in the
LAN Setup menu, and enter the appropriate values for “IP Address”,
“Network Mask”, and “Gateway Address”.
2
Set “NAT Mode” (Page 1/2) to “On” in the NAT/Port screen of the LAN
Setup menu, and enter the appropriate IP address in “NAT Address”.
The setting has been configured properly if the correct NAT address appears in
the launcher menu.
LAN (Connecting through NAT)
Internet
210.10.10.1
Router
Router
210.20.20.2
(Global address)
192.168.10.10
192.168.10.1
210.20.20.1
LAN Setup
General
Cancel
Save
2005.12.28 12:34
Host Name
Off
DHCP Mode
Network Mask
IP Address
DNS Address
Gateway Address
1/2
Page:
Sony
192.100.10.10
225.225.225.0
192.100.10.1
.
.
.
LAN Setup
NAT/Port
Cancel
Save
2005.12.28 12:34
1/2
Page:
NAT Address
On
210.10.1.1
NAT Mode
Содержание IPELA PCS-HG90
Страница 108: ...108 Monitoring the Local and Remote Pictures at the Same Time PandP Side by Side ...
Страница 200: ...Sony Corporation ...