Sony IPELA PCS-HG90, Руководство по эксплуатации

Страница: 52 / 200

52
Registering Local Information
Auto Dialing
Allows you to automatically contact the
remote parties of the selected Private Phone
Book on a “Memory Stick” when you insert
it into the system.
On: Enables automatic dialing.
Off: Disables automatic dialing.
For details, see “To dial a specified list in a
Private Phone Book automatically” on page
64.
Create Private Phone Book
Allows you to create an empty folder and
file for a Private Phone Book on a “Memory
Stick” inserted into the system.
Delete Private Phone Book
Allows you to delete the Private Phone Book
on a “Memory Stick” inserted into the
system.
Copy to Private Phone book
Allows you to copy the entire contents of the
Phone Book to a Private Phone Book on a
“Memory Stick” inserted into the system.
Other Settings (Page 1/2)
Web Monitor
Selects whether or not to permit monitoring
of the JPEG images of this System via a Web
browser.
On: Permits monitoring via a Web browser.
Off: Disables monitoring.
Web Access
Selects whether or not to permit accessing
the PCS-HG90 via a Web browser or Telnet.
Disabled: Prohibits accessing via a Web
browser or Telnet.
Enabled: Permits accessing via a Web
browser or Telnet.
Save Setup
Saves the data for each setting to a “Memory
Stick”. The data for each setting saved on the
“Memory Stick” is overwritten.
Phone Book and History data are not saved.
Load Setup
Loads the data for each setting from a
“Memory Stick”. The data for each setting
saved on the unit is overwritten.
When saving and loading settings, make sure
that the version of the terminal from which the
data was originally saved is the same as the
version of the local terminal. If the versions
differ, the data may not be properly recognized.
Other Settings (Page 2/2)
Measurement from Remote Site
Select whether to allow the remote terminal
activating the network quality measurement.
Disabled: Prohibits the remote terminal
activating the network quality
measurement.
Enabled: Permits the remote terminal
activating the network quality
measurement.
Test Port Number
Enter the port number to be used for the
network quality measurement.
Network Quality Measurement
(Page 1/4)
Allows you to set up for Network Quality
Measurement.
After the settings, you can start the
measurement by selecting “Start
Measurement”.
On Auto Restore
Administrator Setup
Other Settings
Cancel Save
2005.12.28 12:34
1/1
Page:
Save Setup
Load Setup
Enabled Web Access
Off Web Monitor
Note
Note
Administrator Setup
Other Settings
Cancel Save
2005.12.28 12:34
2/2
Page:
Disabled Measurement from Remote Site
Test Port Number