1-13(E)
FDDR-7000 IM
1-5. Installation and Removal of Exterior Parts
B3
x
5
B3
x
5
Front panel
M3 CASE
M3 CASE
M3 CASE
Upper chassis
M3 CASE
Rack angle
BVTT
4
x
10
Front
brackets
Rack
angle
BVTT
4
x
10
BVTT
3
x
6
BVTT
3
x
6
1-5-2. BKFD-7800 (HDD extension box)
n
Before powering off the BKFD-7800, it is necessary to
prepare for shutdown with the SHUTDOWN button of the
FDDR-7000 (Multi-channel digital disk recorder). If you
simply turn the power switch off while recording or
playback is in progress, recorded material or system
information may be lost, and the system will not subse-
quently function correctly.
When the BKFD-7800 is connected, power on the BKFD-
7800 first, and then the FDDR-7000. Do not power on the
host computer until after all connected FARAD systems
are powered on.
1. Front Panel
(1) Turn off the power switch.
(2) Remove the two screws and the front panel.
(3) Install the front panel in the reverse order of the steps
(1) and (2).
2. Upper Chassis
(1) Turn off the power switch.
(2) Remove the front panel. (Refer to “1. Front Panel” in
this section.)
(3) Remove the four screws (BVTT4
x
10) and the rack
angles.
(4) Remove the six screws (BVTT3
x
6) and the front
brackets.
(5) Remove the fifteen screws (M3 CASE) and pull up the
upper chassis.
(6) Install the upper chassis in the reverse order of the
steps (1) through (5).
