1-6(E)
FDDR-7000 IM
1-4. Rack Mounting
Plate nut (long)
Brackets
Plate nut (long)
Outer member
2
B4
x
8
Outer member stopper
(Used to fixing the
outer member
2
.)
Outer member
1
B4
x
8
B4
x
8
B4
x
8
Plate nut (short)
Rack
C4
x
12
W4
12.7
44.45
Bracket
Outer member
Rack
Plate nut (short)
Bracket
Outer member
2
Spec
50
+
5
_
0
W4
C4
x
12
Rack
Outer member
2
FDDR-7000
Inner member
Stopper
Inner member
Outer member
2
Slide bearing
.
When housing the set, shift the slide bearing as illustrated.
3.
Secure the bracket to the outer member
1
by the eight
screws (B4
x
8) supplied with the RMM-FD7000. To
see the screw hole of the outer member
1
, move the
outer member
2
back-and-forth.
4.
Temporarily secure the bracket to the outer member
assembly 1 to both sides of the rack by the eight
screws (C4
x
12) and the eight washers (W4) supplied
with RMM-FD7000. Adjust the installation position
of the outer member to meet the specification shown in
the figure. After the adjustment, tighten the screws
(B4
x
8) temporarily secured in the step 3.
5.
Install the unit in the rack while releasing the stopper
of the inner member.
6.
After confirming that the unit can be moved smoothly,
tighten the screws (C4
x
12) temporarily secured in
the step 4.
