13
Synchronization system example 2
This system divides the master word clock signal with a
divider, and then connects to each device.
Set the 75
Ω
termination switches of all DWR-R03D
units to ON.
Setting the Receiving
Channel
The receiver provides groups of channels for
interference-free transmission. When using multiple
wireless microphones and transmitters (simultaneous
multi-channel operations) within the same area, selecting
the same group and using a channel within that group can
prevent signal interference.
For details on groups and channels, refer to “Sony
Digital Wireless Microphone System Frequency Lists” on
the supplied CD-ROM “Manuals for Digital Wireless
Receiver.”
For details on menu operation, see “Basic Menu
Operations” (page 21).
Selecting the Band Block
This receiver is capable of receiving signals in a wide
band of frequencies.
Set the band block before setting the frequency band/
group/channel.
Set the band block (BAND BLOCK) as follows.
This function cannot be used when the AUTO FREQ
CHANGE function or CHANNEL COORDINATE
function is enabled.
The controls for channel 1 are used in the following
illustration for explanation purposes.
1
Press the UTILITY button to select the UTILITY
menu.
2
Rotate the jog dial to move the cursor to the RF
indication (the characters of the item selected with the
cursor become highlighted), and then press the dial.
3
Rotate the jog dial to move the cursor to the BAND
BLOCK indication, and then press the dial.
4
Rotate the jog dial to move the cursor to the band
block indication that you want to select, and then
press the dial.
Master word clock
a) WORD SYNC IN
b) WORD SYNC OUT
c) Set the 75
Ω
termination switch to OFF
d) Set the 75
Ω
termination switch to ON
Master word clock
a) WORD SYNC IN
b) Set the 75
Ω
termination switches to ON
Word clock divider
Note
