Chapter 5
Editing
90
Chapter 5
Editing
Special Editing
This section explains the following kinds of editing.
• Quick editing
• Continuous editing
• Manual editing
In the subsequent explanation of operations in this
chapter, illustrations of a pair of DSR-70A/70AP units
(player and recorder) combined using the optional
BKNW-225 Docking Kit
are used
(see page 132)
. In
each illustration, as viewed from the front, the unit on
the left is the player and the unit on the right is the
recorder.
Quick Editing
After selecting the edit mode, you can work more
efficiently by using quick editing, which allows you to
set edit points and preview at the same time.
Proceed as follows.
1
Stop the tapes at the points where you want to set
the recorder side and player side IN points.
2
Press the recorder side PREVIEW button.
A preview starts. The points selected in step
1
are
set as the IN points, and the IN buttons of the
recorder and player light.
3
While monitoring the player video and audio, at
the point where you want to set the OUT point,
press the recorder side or player side OUT button
together with the ENTRY/SHIFT button.
The OUT point is set, and the OUT button that you
pressed lights.
Note
Setting an OUT point while viewing the recorder
video and audio will shift the OUT point due to the
time taken by digital processing (process delay)
carried out on the recorder side.
4
Conduct another preview and modify the edit
points as required.
5
Press the AUTO EDIT button.
The edit starts.
When the edit finishes, the recorder stops at the
OUT point and player stops about 2 seconds after
the OUT point.
3
3
5
2,4
1
1
AUDIO IN
TRIM
LIST
MARK
CLIP
LINK
ENTRY SHIFT
IN
OUT
–
+
DELETE
AUTO EDIT
PREVIEW
REVIEW
AUDIO IN
TRIM
LIST
MARK
CLIP
LINK
ENTRY SHIFT
IN
OUT
–
+
DELETE
AUTO EDIT
PREVIEW
REVIEW
