60
Chapter 4
Time Data and Sub LCD Menu
Chapter 4
Time Data and Sub LCD Menu
Information displayed
The figure below shows the time data and operation
status that can be superimposed.
Note
The example above shows the factory default
configuration.
You can use setup menu item 005 to display a different
type of time data in the second line as well.
For details, see page 104.
1
Time data type
Display
Meaning
CNT
Count value of the time counter (COUNTER)
TCR
Timecode reader timecode data
UBR
Timecode reader user bits data
TCR.
VITC reader timecode data
UBR.
VITC reader user bits data
TCG
Timecode generator timecode data
UBG
Timecode generator user bits data
IN
IN point time data
OUT
OUT point time data
AI
Audio IN point time data
DUR
The duration between any two of the four edit
points (IN, OUT, AUDIO IN, AUDIO OUT)
T
*
R
a)
Time code data from time code reader. The
asterisk indicates an interpolation by the time
code reader to make up for the time code data
not correctly read from the tape.
U
*
R
a)
User bit data from the time code reader. The
asterisk indicates that last data is retained by
the time code reader, as the new data has not
been read correctly from the tape.
a) “*” appears when data has not been correctly read from
tape.
2
Timecode reader drop-frame mark (for DSR-
70A only)
3
Timecode generator drop-frame mark
(for DSR-70A only)
4
VITC field mark
“ ” (blank):
Fields 1 and 3
“*”:
Fields 2 and 4
5
Recorder/player selection
The indication changes depending on the status of the
PLAYER/DMC and RECORDER indicators.
No display:
When the PLAYER/DMC and
RECORDER indicators are both not lit.
P:
The PLAYER/DMC indicator is lit.
R:
The RECORDER indicator is lit.
6
Operating mode
The field is divided into three blocks, A, B and C.
• Block A displays the operating mode.
• Block B displays the servo lock status or tape speed.
• Block C displays a
x
mark to indicate an edit section
during automatic editing.
Setting Time Data
T C R
2 3
: 5 9
. 4 0 . 1 8
*
P
S H U T T L E
S T I L L
1
Time data type
Time data
2
Timecode reader drop-
frame mark
a)
3
Timecode
generator drop-
frame mark
a)
6
Operating mode
a) This character can appear on the DSR-70A only. The
character to appear in these two columns is always a colon
(:) on the DSR-70AP.
.
Drop frame mode (factory default setting)
:
Non-drop frame mode
.
Drop frame mode (factory default setting)
:
Non-drop frame mode
4
VITC field
mark
A
B
C
5
Recorder/player selection
