Chapter 1
Overview
Chapter 1
Overview
23
For more information about two-camera switched
recording, see “Two-Input Switched Video Recording”
(page 46).
4
AUDIO IN button
In insert editing, press this button together with the
ENTRY/SHIFT button
5
to set audio IN point
separately from video IN point (audio split editing).
After setting audio IN points, you can press this button
alone to display them in the sub LCD.
5
ENTRY/SHIFT button
Press together with the IN button, OUT button
7
, or
AUDIO IN button
4
to set edit points. The buttons for
the edit points that you set light.
Pressing this button together with a button with two
functions, such as the PLAYER/DMC button or REC/
SEQ button, selects the function indicated in orange on
the button.
6
DELETE button
Press together with the IN/OUT buttons
7
or the
AUDIO IN button
4
to delete edit points. The buttons
go out or flash. A flashing button indicates that the edit
point needs to be set again.
The DELETE button flashes to indicate contradictions
that will prevent previews and automatic editing, for
example when the durations are different on the player
and recorder, or when the IN and OUT points are equal
or reversed. In this case, set the edit points again.
7
IN/OUT (IN point/OUT point) buttons
Press these buttons, lighting them, together with the
ENTRY/SHIFT button
5
to set an IN point (edit start
point) or OUT point (end point). After setting edit
points, you can press either of these buttons alone to
display the IN or OUT point in the sub LCD.
8
PREVIEW button
Press this button, lighting it, when you want to preview
editing results on the monitor after setting edit points
but before executing an edit or to set the player
playback speed for DMC editing. If an IN point has
not been set, the point where you press this button is
used as the IN point in the preview. This button lights
during the preview and goes out when the preview
finishes.
9
AUTO EDIT button
After setting edit points, press this button, lighting it to
execute an automatic edit (record to the recorder). If an
IN point has not been set, the point where you press
this button is used as the IN point in the automatic edit.
This button lights during execution and goes out when
execution finishes.
Pressing this button when the unit is in DMC edit
mode executes a DMC edit.
To conduct DMC editing, a playback speed must be set in
advance. For details, see “DMC Editing” (page 87).
q;
REVIEW button
After executing an automatic edit, press this button,
lighting it to review the results of the edit.
Audio control section
IN
OUT
AUTO EDIT
AUDIO INPUT
PB
AUDIO
PREVIEW
REVIEW
PRESET
VARIABLE
CH-1
PRESET
VARIABLE
CH-2
CH-3
CH-4
2
AUDIO INPUT PRESET/
VARIABLE switch
4
PB AUDIO PRESET/
VARIABLE switch
3
PB AUDIO CH-1 to CH-4 level
adjustment sliders
1
AUDIO INPUT CH-1 to CH-4
level adjustment knobs
