Chapter 5
Editing
86
Chapter 5
Editing
To display the edit list
Press the TRIM–/LIST button.
The edit list appears on the LCD monitor.
You can scroll the edit list by rotating the jog/shuttle
dial.
To exit from the edit list and return to the original
LCD monitor display, press the TRIM–/LIST button
again.
To display detailed data
To display detailed data relevant to the data serial
number selected on the edit list, press the search
button.
A detailed data list as shown in the following is
displayed while the search button is held.
Notes
• The initial speed for DMC is displayed only when
DMC editing is carried out.
• The audio IN and OUT points are not displayed
unless they are set.
• The player edit points are displayed only when two
units (recorder and player) are used.
To modify the data selected on the edit list
and redo the edit
After displaying the edit list, proceed as follows.
1
Turn the jog/shuttle dial to move the selection
mark (*) on the edit list to the line displaying the
data to be modified.
2
Press the SET button.
The edit mode, edit points and, if the edit involves
DMC, the initial speed for DMC of the edit
selected in step
1
are recalled allowing them to be
modified.
3
Modify the data as required.
4
Redo the edit.
The data on the edit redone is added to the end of
the edit list.
* 1 R 00:01:23:02 ASM
P 00:02:35:00
2 R 00:03:50:00 V1234
P 00:04:03:05
3 R 00:05:00:00 V12
P 00:00:00:00
4 R 00:04:18:21 34
P 00:00:00:00
P 00:00:00:00
5 R 00:07:58:03 V13
EDIT LIST
Selection mark
Data serial number
R for recorder, P for player
Edit mode
Edit point timecode
10 VIDEO A1 A2 A3 A4 TC
SPEED+0.12
R IN 00:12:34:01
P IN 00:01:56:01
OUT00:01:56:01
OUT00:12:43:10
AI 00:12:30:00
AO 00:12:43:10
AI 00:01:52:00
AO 00:02:05:10
EDIT LIST
1
2
3
4
5
6
7
8
9
0
1
Data serial number and edit mode
2
Initial speed for DMC
3
Recorder IN point
4
Recorder OUT point
5
Recorder audio IN point
6
Recorder audio OUT point
7
Player IN point
8
Player OUT point
9
Player audio IN point
q;
Player audio OUT point
Executing an Edit
