Chapter 8
Connections and Settings
132
Chapter 8
Connections and Settings
Combining Two VCRs
The following figure shows how to combine two
VCRs using the optional BKNW-225 Docking Kit.
For more information, refer to the operation guide for the
BKNW-225.
Caution
If you combine two units or separate the combined
units incorrectly, the units may fall down and cause
body injury.
Follow the procedures described below for separation
or combination.
DSR-70A/70AP
How to attach handle
Attaching the fixing plates
If you want to be able to combine two units or separate
the combined units without using tools such as
screwdrivers, replace the screws (M3) that hold the
fixing place in place with the supplied coin screws.
Note
The coin screws (M4) for fixing the handle have
washers. When you remove the handle, keep the
screws and washers by fastening them to the handle.
To separate the combined VCRs
Reverse the steps for combination in a horizontal
position.
